[Graeme@Access]

Hi,

Was wondering if any of you could help me out a bit as i have a steempro with a leak. Its leaking from the body to drain valve seal and is progressively getting worse.

Any ideas how to fix this?

I thought i could maybe take the drain valve off the body completely then reaseat it or clean/dry it and seal it with some kind of resin?

Thoughts very much appreciated

Graeme
Access Cleaning Solutions

[David_Annable]

Hi

You will proberly break it taking it off.

Dave

[markpowell]

Take off and replace with new one, 25 pound approx, 10 min job

[clinton]

Ye same here id go with a new one rather than patch it up mate.

[Graeme@Access]

Hi,

Thanks for the replies. I will order a new one and fit it when i have a couple of days down time. In the meantime i cleaned and dried the cracked portion and peeled away the resin between the tank and foam valve gasket. Used a 2 part acrylic glue and heat set it for a temp fix.

Maybe it will hold but time will tell.

Graeme
Access Cleaning Solutions