[Geoff Jewkes]

Can anyone recommend one, internal spray ??

[colin thomas]

cfr, simply the best

[Phillip Mold]

cfr, nothing comes close

[michael fitzgerald]

cfr All Day Long

[Carpet Dawg]

http://www.amtechuk.co.uk/shop/product-info.php?CFR_3__Quick_Dry_Upholstery_Hand_Tool-pid193.html

and they have a sale on! what more can you ask for!

[colin thomas]

ps get the 5" head, i have the 3" as well and have never used it,
colin

[Len Gribble]

CFR will last for years unlike the plastic/nylon type ones, have had mine about 5years and always being borrowed by another cc so it get plenty of usage. The kleenright is good but powder coating comes off.

[Geoff Jewkes]

Near 300 plus vat?!?!?!    GULP!!! But then again my chemspec moisture control tool has done well for 6 years

[mark shannon]

Geoff apart from trigger and hose repairs  the tool treated with respect should last a lifetime. I have  like Colin the 3 and 5" heads and use both on every job.

[Geoff Jewkes]

Think I might treat myself, don`t know which size head though!!

[Geoff Jewkes]

OK, Who uses 3" head and who uses 5"

[Carpet Dawg]

I use the 3inch. I think it'll do a better job at getting in to the nooks and grannies and the edges and curve bit on the front of the arms.

The 5inch is wider obviously so will cover a bigger area i.e. do a quicker job.

Never used the 5inch so might be ok for the nooks and grannies too.

[colin thomas]

use the 5" and when you get to a tight area hold your finger over some of the slot to reduce the size of the slot, easy,

colin

[Geoff Jewkes]

Thanks for the advise! Bought a new cfr which was delivered yesterday, and I have just the suite to try it out on in the morning!!   

[colin thomas]

well done and you won't regret it unless you're a girl and complain that your wrists ache!!!   
when you've got used to it consider changing the nut that alters the vac release for a 'wing nut', much quicker to use than having to dig out a spanner,

colin

[Geoff Jewkes]

Good thinking, I`ll make that slight modification!

[JandS]

What's the difference between CFR and Drymaster?
Apart from price.

John

[Geoff Jewkes]

I think that they work in a similar way but the cfr has a conventional trigger and interchangerble heads. 3, 5 and 7"

[Joe H]

OK, Who uses 3" head and who uses 5"

I started with a 5" and did what Colin suggested when it come to curves on arms etc.

In the end I bought a 3" as well.
Sometimes I use the 3" on the whole suite except back and sides.

[colin thomas]

i have to say that i always use the 5" but to be fair it takes around 5 seconds to change from the 5" to the 3" so the if you have the both you can swop very easily,

colin