Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

wayne zabel

  • Posts: 1082
Clensan
« on: July 12, 2010, 08:14:47 pm »
Had a call from a guy whos spilt milk on his carpet and is causing a bad smell.

The carpet hasn't stained so I'm going to extract the area to get the remnants of the milk out and then apply some clensan,can the area just be sprayed with clensan and left or does it have to be extractd with F&F as it says on the label

davep

  • Posts: 2589
Re: Clensan
« Reply #1 on: July 12, 2010, 08:19:06 pm »
Had this problem a few days ago, depending on what the carpet is and whats under it you need to saturate the area with cleansan and then extract

richy27

Re: Clensan
« Reply #2 on: July 12, 2010, 09:09:12 pm »
pay attention to the under lay no good just treating the carpet you may have to investigate to see how far its been saturated. if you dont the likelyhood is the smell will remain

Paul_Ashworth

  • Posts: 411
Re: Clensan
« Reply #3 on: July 12, 2010, 09:15:58 pm »
Id go with Richards post that you need to check the underlay and might even have to treat the back of the carpet

Bob Allen

  • Posts: 523
Re: Clensan
« Reply #4 on: July 12, 2010, 09:19:08 pm »
I would rather use an emzyme prespray and let dwell, then rinse.......bobs ya uncle
Bob Allen

Carpet Dawg

  • Posts: 2968
Re: Clensan
« Reply #5 on: July 12, 2010, 09:25:41 pm »
Enzall.

wayne zabel

  • Posts: 1082
Re: Clensan
« Reply #6 on: July 12, 2010, 09:47:32 pm »
I have some Enzall,would you use this as a prespray and extract and not use any Clensan?


Carpet Dawg

  • Posts: 2968
Re: Clensan
« Reply #7 on: July 12, 2010, 09:53:56 pm »
Yip, spray on and let dewell for 10 minutes. Might need to do the backing though.

JandS

  • Posts: 4267
Re: Clensan
« Reply #8 on: July 13, 2010, 09:42:08 am »
If possible cut out and replace the section of underlay.

John
Impossible done straight away, miracles can take a little longer.

derek west

Re: Clensan
« Reply #9 on: July 13, 2010, 06:17:29 pm »
wayne

clensan will do the job

we have sprayed without extraction but that was a light spray and wouldn't have any effect on the milk smell.

i wouldn't bother cleaning if it don't need it, just spray on clensan, agitate in, then leave for 10 or 20 mins, then extract with high psi. 350 400 will do. should be fine, did one today but needed cleaning as well, all though in clensans defence, it got quite a few stains out even before we powerburstedededed ;)

Ricky M

  • Posts: 852
Re: Clensan
« Reply #10 on: July 14, 2010, 01:12:15 pm »
If possible cut out and replace the section of underlay.

John

Depending on how much milk was spilt and how long it was on the carpet then John's idea could be a wise move just to make sure then coupled with Derek's reply  .
It maybe worth while to mist and rinse the back of the carpet too at a low psi.

we have done a fair few spill jobs and underlay section replacements are used depending on the type of spill/fluid, volume and length time.

remember to price accordingly !
www.ability1975.co.uk
                          www.carpetcleaninguttoxeter.co.uk  
              NCCA !? but why have non of my clients herd of them ??

JandS

  • Posts: 4267
Re: Clensan
« Reply #11 on: July 14, 2010, 02:01:24 pm »
I did it the other day with some dog urine
and woman was well impressed.
It was near a corner though.

John
Impossible done straight away, miracles can take a little longer.

garyfindlay

  • Posts: 788
Re: Clensan
« Reply #12 on: July 14, 2010, 10:50:15 pm »
no use crying over spilt milk............I`ll get my coat.