Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

James Gregory

  • Posts: 12
Ice Blasting
« on: May 09, 2010, 09:40:37 pm »
Has anyone had any experiance of Ice Blasting. Just doing a bit of research and interested to hear from anyone thats tried it

BDCS

  • Posts: 4777
Re: Ice Blasting
« Reply #1 on: May 09, 2010, 09:53:29 pm »
Do you mean dry ice ? its used in injection molding to clean the tooling. Expensive, hard to get hold off, has to be delivered to site and they don't give the kit away. I have a soda blaster which was a good idea but I have been too busy with the other types of work to concentrate on the boats.

martin19842

  • Posts: 1945
Re: Ice Blasting
« Reply #2 on: May 09, 2010, 10:05:48 pm »
hi there

ive looked at on several occasions for a few projects, but never in the end used it, due to cost.

the principal being that the blasting media, explodes on impact with the substrate, and then lands on the floor, and you then just sweep it up.

you can rent the kit, which you then connect through a high spec airsource.

i used to have info and contact numbers somewhere.

regards

martin