[Blue Frog Systems]

Did you dilute the tfr down ? if so what did you mix it to. Have read that the deepclean tfr can be effective to 100:1, but wondered how you did it

[wizard]

 Where did you buy the deepclean TFR from and how much did it cost.

[Fieldsy]

@windowwipers,

yh, diluted the TFR down, and used it at 40:1   Label says, 20:1 to 50:1, so took a happy medium and seems to work fine.

@wizard

get it here m8y 

http://www.carapak.co.uk/productdetail.asp?ProductID=19

[Ste M]

ive just gone water fed. i gave my customers a leaflet explaining that i now do conservatory roof's, i have had loads of people asking for qoutes but i told them i had to get the chemicals first before i could qoute. How long does the standard roof take? i was thinkin around 2 hours for the whole c onsrevatory. and charging around £50. also did you do it in stages? like half of it at a time on the roof?
oh and doe it help to use a different brush head for this job than the one you usually use for the windows?

ste

[Fieldsy]

Hi,

Sprayed the whole roof with tfr including framework, let it soak in for about 10-15 mins, then it was a breeze to just rub and rinse off each panel at a time. Didn't even need hard scrubbing as the tfr had done all the work 

[EZclean]

she will save in leccy bills by having all that daylight come through 

it reall does look mint

[roger smith]

ive just gone water fed. i gave my customers a leaflet explaining that i now do conservatory roof's, i have had loads of people asking for qoutes but i told them i had to get the chemicals first before i could qoute. How long does the standard roof take? i was thinkin around 2 hours for the whole c onsrevatory. and charging around £50. also did you do it in stages? like half of it at a time on the roof?
oh and doe it help to use a different brush head for this job than the one you usually use for the windows?

ste

  Hi guy's, have you  not thought about using  a dedicated  Uvpc  cleaner  for the conservatory job, Fenwick's have been  making plastic cleaners  for years they  must be worth asking.

[michael papworth]

Fenwick's stuff is good, but a bit pricey. Easy to get hold of small quantities too, at Halfords. Good if you only do a few every so often.

Once, when I didn't have any TFR, I used Flash! It worked OK and smelt lovely.

[wire1078]

nice one

[paul rulton]

that looks the nuts fieldsy bloody well done m8 bet some people on here will want 2
use them pics

[Gav Camm lammy 283]

gud job done nxt door will defo notice may ask u to do
theirs