Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

ladderman

  • Posts: 25
system weight
« on: June 26, 2005, 09:52:17 am »
i have a 650 thero pure system,and wondered if anybody could tell me the weight of the system on its own empty? many thanks.ben

gaza

  • Posts: 1642
Re: system weight
« Reply #1 on: June 27, 2005, 01:22:17 am »
LADDERMAN DRIVE AROUND LIKE A LUNNY FOR A FEW WEEKS fully loaded,wait for the police to stop you and take you to a weighbridge,they will then tell you the gross weight,
then take away the manfactures gross weight and you will not still have the answer to your problem. :o

WHY WORRY ABOUT HOW MUCH IT WEIGHS?its the fully loaded weight you have to watch.
GAZA
IM AT THAT AGE MY BACK GOES OUT MORE THAN I DO

Dominic

  • Posts: 71
Re: system weight
« Reply #2 on: June 27, 2005, 09:25:37 pm »
Hi Ben,

Probably best to check with Ionics on that one. I'm sure they'll have the exact weight for you. I've just got a thermo pure system and just getting used to it, so if you've got any issues I might have experienced them. Good to keep in touch with people with similar systems, so I'll keep an eye out for your posts.

Cheers
Dom

ladderman

  • Posts: 25
Re: system weight
« Reply #3 on: June 27, 2005, 10:19:11 pm »
dom, read some of your earlier posts and every problem you were haveing with your system were the exact of what ive had.where are you from dom?im selby area

ladderman

  • Posts: 25
Re: system weight
« Reply #4 on: June 27, 2005, 10:33:32 pm »
many thanks graham

Dominic

  • Posts: 71
Re: system weight
« Reply #5 on: June 28, 2005, 04:41:11 pm »
Hi Ben

I'm from the Bristol area. I think my system has settled down now. My e-mail is domandcharlotte@blueyonder.co.uk if you need to contact direct. Is your system sorted now?

cheers
Dom

ladderman

  • Posts: 25
Re: system weight
« Reply #6 on: June 28, 2005, 04:57:17 pm »
YEAH ALL OK NOW.WAS GETTING TDS AT 0.00 GOING IN,AND AT THE BRUSH 50.00.MY READINGS JUST STARTED GETTING BETTER AS I JUST KEEP FILLING AND DRAINING.DID THIS CONSTANTLY FOR 5/6 FILLS.WE HAD SOMETHING CAUSEING CONTAMANTION IN THE TANK????????????????.
ALSO WAS GETTIN SILLY READINGS FOR A WHILE WHEN RUNNING ON THURMO,AGAIN WAS TOLD BY IONICS THAT THIS WAS DUE TO THE HEAT EXCHANGER AND THIS ALSO RECTIFIED ITS SELF AFTER A COUPLE OF WEEKS OF USE.BEN ;