[biscuits2269]

What is the best way to cut rubber to size?

[Mist A Bit]

i use my unger window scraper blade or a stanley knife to get a good edge on it

steve

[jonnyald]

i just use a small pair of sharp scissors

[martinsadie]

i pay the extra and get them to length to start with

[Ian Rochester]

New scraper blade, flat surface, single press down on the rubber for a clean cut. 

Cut them to about 4mm longer than your channel length so that you have a 2mm overlap at either end.

Always done it this way without any problems at all

[[GQC] Tim]

i just use a small pair of sharp scissors

Scissors cut your rubbers at a slight angle.

Guilletine method with razor works best. Wet blade and rubber with a bit of soapy water first, makes it easier.