Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Platinum NW

  • Posts: 294
RO or DI
« on: July 09, 2009, 11:48:56 pm »
Just wondering whats the differance between the two and which ones do you guys prefare to use?

Sapphire Window Cleaning

  • Posts: 2942
Re: RO or DI
« Reply #1 on: July 10, 2009, 09:26:58 am »
Platinum it all depends on your TDS reading of your tap water, if its 050 or less then I would say DI, but for most of us our tap water reading is anywhere between 180 and 550, so in those instances you will need an RO system to bring the reading down to about 010-030 then even with an RO it still goes through a DI vessel to finish off the filteration process.
runnin just a DI setup is quicker than RO but is more expensive, 25kg will set you back £60-70 and wouldn't last you that long at all, probably 4-5 weeks tops, thats with a tap TDS reading of 300.
The advantage for the DI is if you run out of water you can top up anywhere.
With the RO you have to either go back home to your static tank and fill up or connect a water source to the filter in your van and wait hours to fill your tank up.
Hope this helps.
Matt
Reaching parts traditional window cleaners can not reach.

Sapphire Window Cleaning

  • Posts: 2942
Re: RO or DI
« Reply #2 on: July 10, 2009, 09:30:12 am »
when I mention 25kg I meant 25kg of mixed bed resin for your DI vessel as its this resin that filters the water.







Matt
Reaching parts traditional window cleaners can not reach.

Platinum NW

  • Posts: 294
Re: RO or DI
« Reply #3 on: July 11, 2009, 02:56:19 pm »
cheers matt
Dont think il need it now tho mate - Im concentrating on renting some work out so i dont have the responsabilities of employing and collecting just a guarenteed monthly income

Thanks for the advice anyway matt