Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

ftp

  • Posts: 4694
Little bleeder!
« on: June 15, 2009, 08:30:25 pm »
Has anyone found a valve so they can bleed their system? I'm often getting inconsistant flow from my system when my tank drops below half full. I'm sure when I brake it allows the pump to gulp some air as the water sloshes forward. This then goes to the DI and so on. Could do with a self bleeding valve of some sorts to get the air out quickly.

Re: Little bleeder!
« Reply #1 on: June 15, 2009, 08:39:51 pm »
If you want to go down that route why not fit a one way valve just after the tank outlet, that'll keep the water in the pipework and stop it running back into the tank.

ftp

  • Posts: 4694
Re: Little bleeder!
« Reply #2 on: June 15, 2009, 08:48:46 pm »
I think because my varistream is permanently on, it gulps the air when the oulet is exposed under braking. I could shut the valve after every job or switch the power off after every job I suppose. Once the air gets in it's a bugger to get through DI, strainer and then pump.

Nathanael Jones

  • Posts: 5596
Re: Little bleeder!
« Reply #3 on: June 15, 2009, 09:22:21 pm »
I have a "T" fitted after my heater, one line goes to my reel, the other goes straight back to the tank via a valve. It was installed for heating the tank on frosty nights, but works brilliant for bleeding the system too.

windowswashed

  • Posts: 2561
Re: Little bleeder!
« Reply #4 on: June 16, 2009, 12:38:25 am »
Totally agree with Neil, fit a one way valve to solve the problem.

ftp

  • Posts: 4694
Re: Little bleeder!
« Reply #5 on: June 16, 2009, 07:57:15 am »
But a one way valve will still let air in in the direction of the water flow would it not?

john tomkins

  • Posts: 1639
Re: Little bleeder!
« Reply #6 on: June 16, 2009, 08:37:54 am »
I had exactly the came problems and it was driving me mad.
Got a 1/2" double barb pvc check valve from dual pumps about £14 delivered (can get cheaper brass ones from a plumbers merchant) this along with mounting the pump and hose as low as possible, totally stopped air getting in, I now have no problems whatsoever.

To answer your last question..... the check valve is under spring pressure, it won't let air/water through unless its more than 0.07 bar
http://www.dualpumps.co.uk/images/Catalogue_PDFs/Check_Valves.pdf
215 item PVC check valve

ftp

  • Posts: 4694
Re: Little bleeder!
« Reply #7 on: June 16, 2009, 06:03:25 pm »
Splendid  ;)

Tim82

  • Posts: 535
Re: Little bleeder!
« Reply #8 on: June 16, 2009, 07:09:59 pm »
I just disconnect the pipe thats connected to the outlet on the pump box until it clears the air lock. simple i know but it does the trick

john tomkins

  • Posts: 1639
Re: Little bleeder!
« Reply #9 on: June 16, 2009, 09:12:44 pm »
I just disconnect the pipe thats connected to the outlet on the pump box until it clears the air lock. simple i know but it does the trick

I used to love doing that 3 to 4 times a day ::)

Tim82

  • Posts: 535
Re: Little bleeder!
« Reply #10 on: June 17, 2009, 09:00:41 am »
used to? ;D