[gwrightson]

can you stone experts advise me on the best possible sealer to apply to a stone floor, the custy is not sure sure what type of stone it is , but i,m going along today to take a look ,"will take some pics "  she wants it to have a high sheen finish that wont keep wearing out , " her words " she says she uses lithonium at the moment 1 coat only and after 3 or 4 weeks it goes dull and loses it colour. she isnt to bothered about expense of the sealer providing it will last.
So basicly I need a little info as what I should recommend.
Geoff

[gwrightson]

lots of experts in this section then   

Geoff

[sherco]

The one i would use is Aquamix floor shine & hardener, you will need to strip old sealer of the stone using there sealer & coatings remover. You will need a floor scrubbing machine and a wet vac to remove the cleaner from the floor, then wash it with just water to remove any of the cleaner, then leave the floor for a day to dry, then seal following the instructions. If you need any moreinfo let me know. ;

[gwrightson]

tks sherco,

where can i purchase this Aqua mix ?

Does it give a high sheen ?  this is idealy what she is wanting.

I shall be cleaning using a pressure spinner with vac attached, after applying the stripper.

geoff

[sherco]

Try www.tradetiler.co.uk, its not on the web site so you will have to call him.

[Chris B]

Make sure you get the floor as neutral as possible for the seal to take to.

[expro]

Is the customer expecting too much?.No seals last forever.Good point about neutralising with an acidic rinse prior to applying the seal.