[lovewindows]

van mounted 40" RO filters and resin ? how do i backwash   

[windowwashers]

van mounted 40" RO filters and resin ? how do i backwash   

at the pure end of ro you should have a tap on a hose.
Remove hose from di vessal first (as it eats resin doing this another way) open up the tap and it will flush, do this for 20mins, unless it is the first time you have used it than upto an hour or 2.
then close tap again to same position as before and run for another 5 mins (do this before you reconnect the resin as the tds will still be high (saving resin life is always good )

If you get lost give me a call on 07788 732 789 and I will help you out.

Ian

[lovewindows]

Cheers for the phone call Window washers , help and advice much appreciated.

[Moderator David@stives]

Will my Ionics 40" RO have a tap on it , if it has i cant see it

[windowwashers]

Will my Ionics 40" RO have a tap on it , if it has i cant see it

it should have somewhere Dave, if not can see you changing membranes, follow the waste pipe up to the membrane, will be surprised if it does not have a valve/tap.

Ian

P.s Lovewindows your welcome