Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

*paul_moss

  • Posts: 2961
Oven cleaning chemical
« on: June 16, 2008, 09:18:59 pm »
Ive put this on the general cleaning side, but was wondering if any one nows of a good chemical that will strip hard ingrained crud off a cooker, both inside and out?
Paul Moss  MBICSc
www.mosscleaning.co.uk
REMOVED FOR POSTING OFFENSIVE MATERIAL

stevegunn

Re: Oven cleaning chemical
« Reply #1 on: June 16, 2008, 09:20:56 pm »

*paul_moss

  • Posts: 2961
Re: Oven cleaning chemical
« Reply #2 on: June 16, 2008, 10:06:12 pm »
Steve have you tried it?
Paul Moss  MBICSc
www.mosscleaning.co.uk
REMOVED FOR POSTING OFFENSIVE MATERIAL

lands

Re: Oven cleaning chemical
« Reply #3 on: June 16, 2008, 10:25:10 pm »
Only on his nuts :D


Art

  • Posts: 3688
Re: Oven cleaning chemical
« Reply #5 on: June 17, 2008, 12:07:07 am »
Paul, i've answered your question on the general cleaning. As Steve mentioned carbon off is good ( i've used it) but you have to buy it in 5 litres with postage.

If it's a one off check my answer in General cleaning

Arthur

*paul_moss

  • Posts: 2961
Re: Oven cleaning chemical
« Reply #6 on: June 17, 2008, 10:23:19 pm »
Thx guys.
Art will try it thx.
Paul Moss  MBICSc
www.mosscleaning.co.uk
REMOVED FOR POSTING OFFENSIVE MATERIAL

Art

  • Posts: 3688
Re: Oven cleaning chemical
« Reply #7 on: June 17, 2008, 10:54:26 pm »
No problem Paul. Just a few pointers that should make things easier.

Get all the racks out and put them in the grill pan or if there's a roasting tray in that. Spray them and leave them until the foam goes and the carbon is dripping then get them in the sink and give them a good scrub with the brillos.

Same with the oven, spray it and leave it, but be careful if there's a fan at the back, don't spray directly into it. Wet rags to clean it out as the brillos might damage the coating, so go easy if you have to use them.

Arthur