As previously posted by Ian
the "woodman method"
After a lot of practise and re-jigging methods of use I think I have cracked how to really use M-Power to its best effect, of course you might disagree
I find that once agitated in a light mist again over the top and leave while you do other things helps.
If used in conjunction with another system the end results can be quite outstanding.
Any way my M-Power procedure is as follows;
1) Vacuum,(a lot), pull out furniture,beds etc, vacuum everywhere.
2) Spot clean procedures as normal if required.
3) Apply M-Power and agitate across carpet using roto and pad,finish off around edges with sebo,
4) Place furniture back in postion You do not need to move the furniture again No further cleaning in these areas is necessary.
5) Leave dwelling for 10-15 miinutes longer is ok if needed.
6) Spray mist Tex (or whatever system you use so long as its non residual and wool safe etc) roto over/extract exposed areas only.
7) Inspect, post spot and dress pile.
Ask client to walk though with you,collect payment.
Why use two systems I hear you ask ?
Because its the most effective way I have found of using it, with fantastic end results, its beats Texatherm on its own and it beats M-Power on its own.You can do the same method by following the early procedure then extract clean exposed areas only, with M-Power in the tank or another non-residual.I have done both and both work.
On some occasions the second procedure has not seemed necessary as the carpet looks fine but I do it any way as it makes me feel better,sad I know
The beauty of the system and M-Power is that it will self neutralise after you have gone, the carpet carries on cleaning its self in effect and of course the drying times are very low.
Because furniture does not need moving again you can move pretty quickly from room to room once the prep-work has been done.
I like to pull out as much furniture as possible and vac behind and M-Power clean, thats TV's,double beds, units, pianos whatever, unless directly instructed by the client to leave it, it gets moved.
I can safely move on then to the main exposed areas and concentrate on them using the two system method above.
At the end your client would have had a low moisture, environmentally friendly carpet clean with no soil attracting residue left behind and all the nasties destroyed in the process.
Test it,try it, I would like to know how you get on.