Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

TVCS

  • Posts: 884
Need a pump.
« on: January 26, 2008, 11:49:24 am »
Hi everyone.

In desperate need of a new pump, shurflo or flojet, not too bothered really.  Anyone recommend a good supplier.   Anyone use a shurflo 150psi?   
Veni, vidi, vino, splatus.

 (I came, I saw, I drank, I fell over...)

d s windowcleaning

  • Posts: 2782
Re: Need a pump.
« Reply #1 on: January 26, 2008, 11:55:08 am »
window cleaning warehouse is as good as anywhere . they have flojet and shurflo pumps but not 150psi . flojet 95 psi shurflo 100 psi both are good pumps .shurflo being the cheapest of the 2 .
where theres muck theres money

TVCS

  • Posts: 884
Re: Need a pump.
« Reply #2 on: January 26, 2008, 11:59:10 am »
I bought in error a 30 psi pump.  tried it just out of curiosity and obviously the pressure was really poor.  Saw a 150 psi on the internet and wondered if anyone uses them for the high reach work.  I run 2 hoses from the 1 pump so it might be worth a try.
Veni, vidi, vino, splatus.

 (I came, I saw, I drank, I fell over...)

d s windowcleaning

  • Posts: 2782
Re: Need a pump.
« Reply #3 on: January 26, 2008, 12:07:55 pm »
both the flojet and shurflo pumps are able to run to poles . the 150 psi pump how many ltrs per minute was this . 30 psi pumps are ok for trolleys with only a short lenght of hose around 8 mtrs any more than that the pump dont want to play .
where theres muck theres money

CLAPHAM

  • Posts: 55
Re: Need a pump.
« Reply #4 on: January 26, 2008, 12:11:02 pm »
Try PureFreedom on Ebay.
They sell pumps and controlers.
Very good prices.

TVCS

  • Posts: 884
Re: Need a pump.
« Reply #5 on: January 26, 2008, 12:14:29 pm »
the 150 psi is 6.8 lpm
Veni, vidi, vino, splatus.

 (I came, I saw, I drank, I fell over...)

TVCS

  • Posts: 884
Re: Need a pump.
« Reply #6 on: January 26, 2008, 12:18:29 pm »
what sor of lpm should I be looking at?
Veni, vidi, vino, splatus.

 (I came, I saw, I drank, I fell over...)

d s windowcleaning

  • Posts: 2782
Re: Need a pump.
« Reply #7 on: January 26, 2008, 02:07:55 pm »
you only need arond 1.5 ltrs per min . you probally wont find a pump this low shurflo is around 5.4 per min . but varistream helps with flow .
where theres muck theres money

john tomkins

  • Posts: 1639
Re: Need a pump.
« Reply #8 on: January 26, 2008, 02:44:52 pm »
Folks seem to get confused over psi and ltr/per min.
Psi is the pressure the pressure switch cuts out at.
Ltr/per min is the amount of water outputted.

Example... a 150psi  wont output any more water than a 60psi, it's the ltr/ per min that gives the oomph.
I stand to be corrected ;)

TVCS

  • Posts: 884
Re: Need a pump.
« Reply #9 on: January 26, 2008, 03:57:36 pm »
I had a flojet 100psi with 6 lpm.  I tried the 30psi shurflo with a slightly higher lpm and the flow was very poor indeed.   ???
Veni, vidi, vino, splatus.

 (I came, I saw, I drank, I fell over...)

d s windowcleaning

  • Posts: 2782
Re: Need a pump.
« Reply #10 on: January 26, 2008, 04:26:02 pm »
when using the 30 psi pump how much hose were you using ? ive got a 30 psi pump and too much hose is a none starter you can only use around 8 mtrs of hose with these . shurflo 100 psi with varistream reduce flow down to around 1.5 ltrs per minute and you will be fine . same with flojet .
where theres muck theres money