[dave0123]

Is there a conection you can get from 6mm john guest fitting to normal hose size? because from my RO output pure water to the di vessel the vessel has hoselock connectors.


Please help Dave

[[GQC] Tim]

How about this?

http://www.gardinerpolesystems.co.uk/acatalog/Standard_Plastic_End_Stops_etc.html

 

[dave0123]

Thanks that looks like it!

Tar GQC

[matt]

that fitting looks like its 6 mm , if its for the RO pipe, its 6 mm external, so you need something like ( it comes with another bit thats for 6 mm pipe )

[dave0123]

Matt,


Its for the ro tubing, which one is right your one or the above? if its yours were can you get them from?


Dave

[matt]

taken from the DIY forum, if your on it, it also has the pics, its a post called "A few questions for you Jeff B (or anyone else)"


i know "homebase" stock all these parts, my both local 1's do

a pressure reducer, it comes with connections to 6mm and the bigger size ( might be 13 mm ) you only need the 6 mm, UNSCREW THE UNIT AND take out the body of it off, you only need the screw bit


www.hozelock.com/productcatalog/products.asp?range=watering&region=ROW&hierarchyID=1&hierarchyID2=54&hierarchyID3=58&hierarchyID4=60&hierarchyID5=



right you then need




www.hozelock.com/productcatalog/products.asp?range=watering&region=ROW&catno=2289&hierarchyID=1&hierarchyID2=33&hierarchyID3=36&hierarchyID4=

screw them together

6 mm rain pipe goes into the 1 end and the other is a hozelock that just plugs into your stop end

job done


---------------------------------------------------------------------

[matt]

infact thinking of it

you should be able to just unscrew the hoselock end from the DI and use this instead

http://www.hozelock.com/productcatalog/products.asp?range=watering&region=ROW&hierarchyID=1&hierarchyID2=54&hierarchyID3=58&hierarchyID4=60&hierarchyID5=

[dave0123]

and you can buy these from places like home base B&Q



Dave

[dave0123]

Il pop up tomorrow morning have a look



Thanks Matt

[matt]

homebase deffo have them

they are on the hozelock display

you will only really need the 6mm fitting, but need to buy the whole thing ( not over the top in price though )

[dave0123]

Thanks matty will pop up.

i orderd that hose tail conector before but nevermind spose come in handy at some point.



Dave

[Alex Gardiner]

Is there a conection you can get from 6mm john guest fitting to normal hose size? because from my RO output pure water to the di vessel the vessel has hoselock connectors.


Please help Dave

What you need is this



connected to this



Which in turn needs one of these connected to it (middle fitting)



The details are as follows

1:

John guest 1/4" push-in fitting to 1/4" male screw thread
John guest 1/4" push-in fitting to 1/4" male screw thread
Price: £1.75 (Excluding VAT charge at 17.5%)

2:

Female to Female reducing socket 1/4" to 3/8"
Reducing Socket 1/4" screw thread to 3/8" screw thread.
Price: £1.55 (Excluding VAT charge at 17.5%)

3:

Hose Barb to male screw thread Various sizes
Nylon male screw thread to hose barb fittings.

3/8" screw to 1/2" barb (pump fitting)
Price: £1.25 (Excluding VAT charge at 17.5%)

This will allow you to connect your 6mm OD RO tube to a length of 1/2" standard hose.

[dave0123]

Alex i orderd the wrong thing from your website earlier today.

Could the parts be changed to the correct parts as you staterd above? and i can give you payment for the extra money that is owed?

The order was in the name of (matthew) he is sort of a partner who works along side me i did email you about it before.

Let me know thanks or reply to the email

Thanks  dave

[Alex Gardiner]

No problem.  I've notified Kirsty by email to cancel your original order.  Just go back on the website and order what you need.  Kirsty will sort out payment with you.

[dave0123]

ok thanks  very much Alex,

Should i put in payment details again?


and on your website the
Hose Barb to male screw thread Various sizes > 3/8" screw to 1/2" barb (pump fitting)

 thats the one i need the middle selection on the drop down box??

[Alex Gardiner]

Yes, you've got the right one (middle of picture/second in drop down list).  You will need to put in payment details again.

[dave0123]

Thanks All orderd again.


Thanks for your help.