[anderclean]

guys
what's the best way to join 6mm microbore to half inch hose ?
thanks
rob

[jouk45]

you are looking to buy a reducer, i think gardiners have them,
like this
http://www.solwayfeeders.com/ProductsDetail1.asp?STOCK_CODE=1394&froogle=true

[JM123]

if its not going to be trailing on the ground all you need to do is push the microbore inside the half inch hose and tightne on to it with a jubilee clip.

[Alex Gardiner]

One of these -



1/2" to 6mm reducer.

[matt]

alex, is that 6 mm I/D or O/D

do you do anything that will take a 6mm O/D to hoselock

[Alex Gardiner]

Hi Matt

That one is 6 mm ID.  I  can get hold of a combination of three nylon fittings that would give you an 1/8 inch (3 mm ID) barb to a 1/2 inch barb.  I would need to order one of the parts in for you.

[NWH]

Alex when are those brushes ready.

[Alex Gardiner]

Hi NWH

You know what it's like!  It's one thing getting the concept agreed on, it's another thing getting the finalized tooling done and a production run scheduled.  It is progressing though and we think we will be very happy with the finished article.  Just don't hold your breath 

[NWH]

I saw a superlite brush the other day and it looked slightly softer,better in fact.Did they do a batch that were improved upon,it looked a much better brush than the original.

[Alex Gardiner]

Yes they did do a softer batch.  I'm still not sure which I prefer to use.