[Evan]

Hi guys, any help as to why I can’t ge my water to zero..it’s entering my di vessel at 15 and coming out after at 6 and recently changed the resin so it’s not old resin using Tulsion 115mb??

[֍Winp®oClean֍]

I stopped using Tulsion about 3 years ago because it became so inconsistent! It used to be great to begin with and built a good reputation. However, for whatever reason it all went Pete Tong. Used Unger ever since which has been super consistent.
That's my experience but..... you may wish to check the internal riser tube rubber seal and any internal strainers.

[Frankybadboy]

what size DI have you got

bet its a very small one ?

[Evan]

what size DI have you got

bet its a very small one ?

11 litre di vessel

[james peters]

I stopped using Tulsion about 3 years ago because it became so inconsistent! It used to be great to begin with and built a good reputation. However, for whatever reason it all went Pete Tong. Used Unger ever since which has been super consistent.
That's my experience but..... you may wish to check the internal riser tube rubber seal and any internal strainers.

Interesting. I am DI only, and I have noticed that my resin doesnt last as long as it used to .

[Splash & dash]

I stopped using Tulsion about 3 years ago because it became so inconsistent! It used to be great to begin with and built a good reputation. However, for whatever reason it all went Pete Tong. Used Unger ever since which has been super consistent.
That's my experience but..... you may wish to check the internal riser tube rubber seal and any internal strainers.

Interesting. I am DI only, and I have noticed that my resin doesnt last as long as it used to .

Tap water TDS can alter on a daily basis so unless you check it regularly if it’s risen this could be why the  resin hasn’t lasted as long and nothing to do with the resin it’s self .

[֍Winp®oClean֍]

I stopped using Tulsion about 3 years ago because it became so inconsistent! It used to be great to begin with and built a good reputation. However, for whatever reason it all went Pete Tong. Used Unger ever since which has been super consistent.
That's my experience but..... you may wish to check the internal riser tube rubber seal and any internal strainers.

Interesting. I am DI only, and I have noticed that my resin doesnt last as long as it used to .

Tap water TDS can alter on a daily basis so unless you check it regularly if it’s risen this could be why the  resin hasn’t lasted as long and nothing to do with the resin it’s self .

This is true. In my case though, tds was the same and I changed both DI vessels and bought a new TDS meter. It was the resin.

[Dry Clean]

You have a leak or disconnected riser tube which means some of your water isn't going all the way through the resin and mixing with the water that has,  before pushing the riser tube into the resin fill the vessel with water,  this makes it a lot easier to push the riser tube in straight, if its pushed in slightly off centre it can come loose or leak when you tighten the lid.

[james peters]

I stopped using Tulsion about 3 years ago because it became so inconsistent! It used to be great to begin with and built a good reputation. However, for whatever reason it all went Pete Tong. Used Unger ever since which has been super consistent.
That's my experience but..... you may wish to check the internal riser tube rubber seal and any internal strainers.

Interesting. I am DI only, and I have noticed that my resin doesnt last as long as it used to .

Tap water TDS can alter on a daily basis so unless you check it regularly if it’s risen this could be why the  resin hasn’t lasted as long and nothing to do with the resin it’s self .

sorry, I should have said . my tap tds used to be around the 70- 80 mark.
the past few months it has stayed around 50
thats why I believe the resin is of less quality

[the king]

My tap tds jumped to 156 i was changing resin every 4 days nite mare now its back down to 83 realy strange how it jumped so high 

[dazmond]

My tap tds jumped to 156 i was changing resin every 4 days nite mare now its back down to 83 realy strange how it jumped so high 

my tap tds went up to 105  for a few weeks many moons ago but its been 024 for years now

[dazmond]

My tap tds jumped to 156 i was changing resin every 4 days nite mare now its back down to 83 realy strange how it jumped so high 

you must have a small di  if your changing it every 4 days!what size is it?

my main one is a 25l vessel and change the resin approx every 5 months

[deeege]

My water went from 030ppm to 420ppm overnight and has been in the 400’s ever since. That was fun.

[the king]

ive got to 11l di's  i go through 400l a day some days more thinking about going for a 4040 ro
My tap tds jumped to 156 i was changing resin every 4 days nite mare now its back down to 83 realy strange how it jumped so high 

you must have a small di  if your changing it every 4 days!what size is it?

my main one is a 25l vessel and change the resin approx every 5 months