[Blue Frog Systems]

Want to make some gutter vac end tools that are specific shapes to my needs. Only problem is I cant find the right diameter plastic.

Anyone know where I can get the right type of plastic as it's quite a thick hard wearing plastic

[Splash & dash]

Want to make some gutter vac end tools that are specific shapes to my needs. Only problem is I cant find the right diameter plastic.

Anyone know where I can get the right type of plastic as it's quite a thick hard wearing plastic

I used 1 1/2 solvent weld waist pipe and a straight joiner that will fit most cuffs if not put a couple of turns of insulation tape on it works a treat ,

[Smudger]

Ali is better - you can shape it - squash it - bend it

2" thin wall is what I use

Darran

[Splash & dash]

Ali is better - you can shape it - squash it - bend it

2" thin wall is what I use

Darran

We shape the plastic pipe in a vice with a hot air gun once the plastic pipe has cooled it retains the shape you have made .

[Spruce]

Want to make some gutter vac end tools that are specific shapes to my needs. Only problem is I cant find the right diameter plastic.

Anyone know where I can get the right type of plastic as it's quite a thick hard wearing plastic

Ask Herman to make a diy video for you.  He was asking for suggestions.

[swanson]

Just buy them
Saves all the faff

[Splash & dash]

Just buy them
Saves all the faff

There is no faff takes less than 5 muinits and costs  a couple of quid , also you can make up stuff for specific jobs that you cannot buy .

[swanson]

Each to there own