Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Pages: [1]

MisterC

  • Posts: 63
Pump Problem
« on: March 11, 2018, 06:52:50 am »
I have a fault with one of my pumps, it will work but keeps stopping for a few seconds then starts again.
Does anybody know someone who can diagnose and possibly fix this problem in the  Bournemouth area ?
Thanks for any advice
Logged

Elfyn

  • Posts: 495
Re: Pump Problem
« Reply #1 on: March 11, 2018, 07:40:02 am »
More detail needed. What pump? What machine? etc
Logged

Simon Trapani

  • Posts: 1562
Re: Pump Problem
« Reply #2 on: March 11, 2018, 07:52:11 am »
Do you have a controller fitted? If so re-calibrate it.
Logged

MisterC

  • Posts: 63
Re: Pump Problem
« Reply #3 on: March 13, 2018, 05:29:00 pm »
Hi. It's a Brodex system and an Aquatec DDP 5800 pump
Logged

dazmond

  • Posts: 23988
Re: Pump Problem
« Reply #4 on: March 13, 2018, 05:51:02 pm »
set the CAL higher....
Logged
price higher/work harder!

Avo

  • Posts: 1634
Re: Pump Problem
« Reply #5 on: March 15, 2018, 07:19:51 am »
This is correct you need to set the calibration as the pressure switch is set to low and cutting off the pump, what you need to do is press the two outside buttons and hold them down until it displays letters CAL then turn it up to your desired settings.
Logged
Pages: [1]