Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Mike #1

  • Posts: 4668
Re: Tubeless conversion update.
« Reply #20 on: November 07, 2015, 06:08:17 am »
Very nice Steve good vid .

DaveG

  • Posts: 6347
Re: Tubeless conversion update.
« Reply #21 on: November 07, 2015, 07:56:37 am »
Hi Steven, I use and slx 18 as my everyday pole and add (upto 4) extra sections as and when needed.. Would the tubeless system still work with the extra sections on..?

Apologies if it's already been covered!

Cheers
You can't polish a turd

steven jones

Re: Tubeless conversion update.
« Reply #22 on: November 07, 2015, 08:51:46 am »
Hi Dave,

Yes it would work fine.

Steven.

kempy

  • Posts: 1442
Re: Tubeless conversion update.
« Reply #23 on: November 07, 2015, 09:04:37 am »
Does the new aqua adaptor only work with this tubeless kit .

Or is the new Aqua-adaptor independent of this tubeless method .

DaveG

  • Posts: 6347
Re: Tubeless conversion update.
« Reply #24 on: November 07, 2015, 09:11:53 am »
Hi Dave,

Yes it would work fine.

Steven.

Thanks for the reply. Wouldn't the ejector be "too short" once the extra sections were added?
You can't polish a turd

Clever Forum Name

  • Posts: 5942
Re: Tubeless conversion update.
« Reply #25 on: November 07, 2015, 09:36:19 am »
Hi Dave,

Yes it would work fine.

Steven.

Thanks for the reply. Wouldn't the ejector be "too short" once the extra sections were added?

Good question! I fit two extensions to a 25 sometimes!

steven jones

Re: Tubeless conversion update.
« Reply #26 on: November 07, 2015, 10:18:54 am »
No,

It would be unaffected regardless of how many sections are added.
Steven.

steven jones

Re: Tubeless conversion update.
« Reply #27 on: November 07, 2015, 10:20:14 am »
Does the new aqua adaptor only work with this tubeless kit .

Or is the new Aqua-adaptor independent of this tubeless method .
yes
It works regardless .
Steven.

DaveG

  • Posts: 6347
Re: Tubeless conversion update.
« Reply #28 on: November 07, 2015, 10:26:00 am »
No,

It would be unaffected regardless of how many sections are added.
Steven.

Thanks again for the replies Steven.. If I added, say 3 sections, How would I reach the ejector to connect and disconnect when It only just comes out of end of the pole without extensions?
You can't polish a turd

steven jones

Re: Tubeless conversion update.
« Reply #29 on: November 07, 2015, 11:13:33 am »
No,

It would be unaffected regardless of how many sections are added.
Steven.


Steven.

Thanks again for the replies Steven.. If I added, say 3 sections, How would I reach the ejector to connect and disconnect when It only just comes out of end of the pole without extensions?

It only is affected on the xtreme poles but I am producing some end caps to sort this, no problem on slx and clx though.

Steven.

JackieW

  • Posts: 865
Re: Tubeless conversion update.
« Reply #30 on: November 07, 2015, 01:15:26 pm »
Hi Steven,

Just curious,
if the male fitting is up against the pole bung at the bottom of the pole and
the internal pole hose is  fixed tight at the top of the pole,

is it the stretch in the pole hose that allows you to retract the sleeve ejector?

steven jones

Re: Tubeless conversion update.
« Reply #31 on: November 07, 2015, 02:14:27 pm »
Hi Steven,

Just curious,
if the male fitting is up against the pole bung at the bottom of the pole and
the internal pole hose is  fixed tight at the top of the pole,

is it the stretch in the pole hose that allows you to retract the sleeve ejector?
Yes, your spot on!