[johnny bravo]

pump+ controller arived today,

wiring set-up,Pump to controller V11 Analogue controller  + Shurflo 5L/Min

there are 3  wires connected onto pump, leaving 2 red connected,   + 1 black  open wire ,+ 1 red open wire. these two connect to Controller,
    
Connecting  the Controller to pump
the controller has a brown which connects to the red on pump,
the Blue wire from Controller  connects onto the Black
 on the pump

Controller to Battery
Red  to  + with inline fuse fitted
Black to -

i want to make sure as even Wagga burned his out when connecting

is this coorect,    thanks.

battery +} charger in now here,   + tank tap,etc.

hopefully looking for good weather this weekend to set up.    fingers crossed.
a bit hessitant  but excited at the same time.      Soon be XMAS

[Dave Willis]

Didn't you get the instruction sheet?

[Spruce]

Didn't you get the instruction sheet?

Dave,

Johnny must have missed this thread we responded to.

http://www.cleanitup.co.uk/smf/index.php?topic=190967.0

[Ian Sheppard]

Link to controller guides scroll down for the analogue http://www.springltd.co/node/44

Also you may find this useful its a short Vid on calibration https://www.youtube.com/watch?v=U_6dPgfBjSI

[johnny bravo]

great.
obviously you dont remove the 2 red wires connected into the shurflo pump itself.
setting up this weekend

[Ian Sheppard]

Yes leave the red cables running from the pump base to the pump head there connect the pressure switch. You are connecting the Positive (brown or Red) and the negative Black. To the brown and black from the controller

[johnny bravo]

thanks ian