Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Pages: [1]

Mr Sparkle

  • Posts: 263
Please help me
« on: July 21, 2014, 09:31:27 pm »
Desperately need a booster pump as I'm using too much resin with my very slow water production!
Would this pump fit my merlin?
http://www.purefreedom.co.uk/24v-aquatec-reverse-osmosis-booster-pump-power-supply-p-274.html

If not can you recommend one that will ?
Logged

Smudger

  • Posts: 13428
Re: Please help me
« Reply #1 on: July 21, 2014, 09:37:41 pm »
Don't get that it's not suitable.

I linked you a pump in the other thread, and others have suggested the Clarke pump

Best regards

Darran
Logged
Never argue with an idiot, they will only bring you down to their level, and beat you with experience

Mr Sparkle

  • Posts: 263
Re: Please help me
« Reply #2 on: July 21, 2014, 09:47:37 pm »
Thanks Darren  think will get the clerkes one you suggested!
Was just hoping I could get one a little cheaper.
Was hoping any would fit a merlin
Logged

8weekly

Re: Please help me
« Reply #3 on: July 21, 2014, 09:51:01 pm »
I have the same problem Mr Sparkle and bought the Clarke pump without the controller.
Logged

Barryy

  • Posts: 197
Re: Please help me
« Reply #4 on: July 22, 2014, 01:50:12 am »
Quote from: Mr Sparkle on July 21, 2014, 09:31:27 pm
Desperately need a booster pump as I'm using too much resin with my very slow water production!
Would this pump fit my merlin?
http://www.purefreedom.co.uk/24v-aquatec-reverse-osmosis-booster-pump-power-supply-p-274.html

If not can you recommend one that will ?
I have that Aquatec pump on my 450 RO system for the last 3yrs, works perfectly, increased pure production significantly. Also you can let it run dry with no probs. You can get it here for a little less expensive: http://www.windowcleaningwarehouse.co.uk/ROBPU.html
Logged

Smudger

  • Posts: 13428
Re: Please help me
« Reply #5 on: July 22, 2014, 06:37:16 am »
There is a big difference between the requirements in pressure and production speed between a 450 RO and a Merlin.

Any pump will fit the Merlin, you may need to buy the correct fittings tho.


Darran
Logged
Never argue with an idiot, they will only bring you down to their level, and beat you with experience

Mr Sparkle

  • Posts: 263
Re: Please help me
« Reply #6 on: July 22, 2014, 10:23:24 am »
Logged

CleanClear

  • Posts: 14535
Re: Please help me
« Reply #7 on: July 22, 2014, 10:27:26 am »
We've been running this pump for two years now (maybe a bit longer), not had any problems with it. We've used it on the Merlin and its also used on out 4040's. Its not auto cut off.

http://www.machinemart.co.uk/shop/product/details/051012200
Logged
*Status*--------Currently Online---------

Mr Sparkle

  • Posts: 263
Re: Please help me
« Reply #8 on: July 22, 2014, 11:11:01 am »
Thanks crystal clear, that's a brilliant price, well chuffed at that!
Is it easy to install with a merlin?
Logged

Avo

  • Posts: 1634
Re: Please help me
« Reply #9 on: July 22, 2014, 06:46:53 pm »
Quote from: CleanClear on July 22, 2014, 10:27:26 am
We've been running this pump for two years now (maybe a bit longer), not had any problems with it. We've used it on the Merlin and its also used on out 4040's. Its not auto cut off.

http://www.machinemart.co.uk/shop/product/details/051012200
what kinda psi will this produce crystal ?
Logged
Pages: [1]