[Phil @ Extreme Clean]

LM the way to be machine sticks to carpet and dry in an hour everytime 

[jeff1966]

Hi John, is this the machine you mentioned earlier, that can switch between series & parallel setup.
https://www.youtube.com/watch?v=stjs-bQC6c4

[john martin]

Hi John, is this the machine you mentioned earlier, that can switch between series & parallel setup.
https://www.youtube.com/watch?v=stjs-bQC6c4

Yes thats it ..
Its based on the ninja replacement body ... the ninja warrior but with a nice build quality from hydro-force .
The high performance 8.4 version is called the nautilus extreme .

[Glynn]

Simon
You used a PC Quad jet with a glide fitted, I think it would have been better without the glide.

[Simon Gerrard]

Glyn,
Tried it without, just the same. Also tried the HM want with and without.
Should have tried it with a standard portable wand as well.

Simon

[Glynn]

I must admitt, a 4 jet wand probably puts down too much for a porty to recover esp to the extent you are used to with a Truckmount.

[Simon Gerrard]

Just thought it would cope 200psi.

Simon

[Shaun_Ashmore]

What jet sizes were you using?

I'm interested to what you use for your truckmount.

Shaun

[Adrian Walton]

I think Ashbys fit 1.5 jets to there two jet wands they supply with the 400psi ninja not sure about the enforcer but i would think they are the same, so probably putting down a bit to much water with a quad jet wand.

[Simon Gerrard]

What jet sizes were you using?

I'm interested to what you use for your truckmount.

Shaun

Shaun,

95015

Simon

[Shaun_Ashmore]

I don't think a Porti could handle that kind of flushing power 04 in total is the max IMO but for a tm well that's a different story.

Shaun

[jim mca]

But would that change with the power of the T/M 

[Simon Gerrard]

I use the same wand at 350 to 400 psi and the carpets are almost dry afterwards.

Simon