[Londoner]

Alright, I know I am opening the door to all sorts of jokes and double meanings but this is a serious question.
My local supplier only ever stocked one make, Ettore, but through this forum I have found a number of suppliers who have a much bigger range.
I was wondering what you guys thought was the best or are they all much the same just different names.

[Old_Master]

There is a difference and you need to try different ones to find out what suit you.
There are hard, soft, silican, pure rubber.
Personally we use sorbo which are pure silican costs more but last longer. At the end of the day its down to individual choice - much like whats your favorite brand of Beer.

[Simon_King]

I like to use Pulex Soft. They suit me fine and are pretty cheap. I've had no problems with them. I used Unger soft for a bit as well. With Ettore and Unger you will always pay a bit more for the name. Didn't Know that about Sorbo rubbers - might give them a try.

[paul]

we were using a local brand but have now gone back to unger soft till the summer

[Terry_Burrows]

;)Pulex takes some beating! :

[Mikey Warner]

I've been using unger hard/soft since i started. I tried Pulex after reading so many used it on here and it ended up a nightmare of a day for me So I'm back to my Ungers

Mikey

[gibbouk]

pulex soft after trying others i find these so much better. new one daily.

[crystal]

Do any of you cut your used rubbers down to fit your smaller squeegies or would i be accused of being a tightwad, just it does seem a waste

[gibbouk]

the cheapest way to buy them is in 36" lengths and cut them down to fit squeegees you will find that most have us have cut down a channel to fit something or other, make sur you  use a sharp blade to cut them with and get the cut nice and square

[WavieDavie]

Do any of you cut your used rubbers down to fit your smaller squeegies

Too Right! We buy them in 36" or 42" and cut them down. When they wear at the edges, they get kept to be cut down to the next size. When they wear in the middle, they get chucked out.

or would i be accused of being a tightwad,

Not at all, Laddie. Matt was made an Honorary Scotsman at the start of the month, and you can now be considered the same.

Just keep practising . . . "Och aye, the noo" . . . "Jings, crivvens an' help mah Boab" . . .  "If ah gie her ony mair Captain, she'll blow!"  

[g_griffin]

Old Master,

         I like the look of the Sorbo squeegee, the 3x 4. But with the  4 groove channel do you have to use Sorbo rubber?
 
            Thanks,
               
                Gerry.

[Old_Master]

Yes you need to use the sorbo rubbers the profile is designed specially for their channels.
Ill bring some to the Fed show and you can have a go.
Glyn

[g_griffin]

Thanks Glyn, but I won`t be at the fed show (although I`m tempted now- going to Cheltenham racing next month, so you know how it is).
 
 When I get the Sorbo blade I know to get the rubber as well now. I usually get Pulex, which is much cheaper but I don`t mind paying extra if the Sorbos as good as it looks and lasts longer.

    Thanks again,

         Gerry.
 

[Old_Master]

I have honestly had conversation with someone who told me he hadnt changed the rubber blade on his sorbo for over six months!!

[fez]

I've been using unger hard/soft since i started. I tried Pulex after reading so many used it on here and it ended up a nightmare of a day for me So I'm back to my Ungers

Mikey

I had the same problems with Pulex, it turns out that they don't fit Unger S channel so well. I went back to Unger rubbers myself. :-/

[paul w]

i use pulex soft and hard+ettore try taking out one channel clip if you get probs that works for me :

[Philip Hanson]

I had the same problems with Pulex, it turns out that they don't fit Unger S channel so well. I went back to Unger rubbers myself

I had this problem too, the rubber is narrower than an Unger, so pops out of the channel at the ends- most annoying!

I have always used unger, just because its what I know.

Silly

[fez]

I had this problem too, the rubber is narrower than an Unger, so pops out of the channel at the ends- most annoying!

I have always used unger, just because its what I know.

Silly

Where do you buy yours (Unger Rubbers, that is), Silly? Seen any good deals?