Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Smudger

  • Posts: 13434
Di resin bottle malfunction
« on: August 09, 2011, 09:19:52 pm »
During the last fill up my ro started acting up and water production dropped rapidly, i had a play around with
hoses and connectors etc.. and managed to fill the IBC's

Today started up all running good until i connected the 2nd di bottle when  the water production stopped and the
back pressure of water started to make the connectors leak.

i've taken the top off and blown through the inlet & outlet and it all seems clear - re assembled and the same
thing happened again.

any thoughts on solving this problem ?

cheers
Darran
Never argue with an idiot, they will only bring you down to their level, and beat you with experience

luther1

  • Posts: 1071
Re: Di resin bottle malfunction
« Reply #1 on: August 09, 2011, 10:49:29 pm »
What sort of set up is it? One of those gpd jobs or a 4040 with twin di's?

Smudger

  • Posts: 13434
Re: Di resin bottle malfunction
« Reply #2 on: August 09, 2011, 10:59:06 pm »
Merlin RO

followed by a 19 ltr di vessel and an 11 ltr di vessel


Darran
Never argue with an idiot, they will only bring you down to their level, and beat you with experience

luther1

  • Posts: 1071
Re: Di resin bottle malfunction
« Reply #3 on: August 09, 2011, 11:05:55 pm »
Can you swap your di's over for 2 minutes to see if its a di problem or connector issue? Might be a loose riser

Smudger

  • Posts: 13434
Re: Di resin bottle malfunction
« Reply #4 on: August 09, 2011, 11:09:45 pm »
Vessels are different makes - i think the threads maybe a different size - however i will check tomorrow

cheers

Darran
Never argue with an idiot, they will only bring you down to their level, and beat you with experience

Paul Coleman

Re: Di resin bottle malfunction
« Reply #5 on: August 10, 2011, 11:38:44 am »
The two possibilities that spring immediately to mind are
(1) The second vessel is blocked with resin )possibly in the riser tube)
(2) One or both of the connectors on the second vessel is/are faulty.

Especially if you are using hozelock style, try some new connectors (after ensuring no blockage).

Another thing that comes to mind is ensuring that you have the in/out the right way round.

gto

  • Posts: 682
Re: Di resin bottle malfunction
« Reply #6 on: August 10, 2011, 05:23:17 pm »
just had a very similar problem.
turns out the short hose i use from the di to tank has a water stop end on one end and i had put it the wrong way round.
so i got soaked disconnecting the pressurised hose to take it out to test before i realised.

Smudger

  • Posts: 13434
Re: Di resin bottle malfunction
« Reply #7 on: August 10, 2011, 11:36:15 pm »
All sorted and many many thanks to Doug at Daqua !

there are 2 types of riser - straight tube with bulb end OR one like i have which is sleeved and contains
a fine mesh filter inside - this needs to be unscrewed and cleaned - hey presto full uninterupted water flow!

Darran
Never argue with an idiot, they will only bring you down to their level, and beat you with experience