[H2O TECH]

Hi
I only just set up my system last night, and got my water down to 0.00 using a RO 300 and 11L DI

So new resin went in last night, and brand new RO which gets my water down to 13 before it goes into the DI.

My water is 430

and I only want to make 100-200L per day, approx how long should i expect the water to be 0.00? and need to to buy resin?

Also what TDS is the limit for using once it starts to go up i.e 0.08 ?or more or less.

Regards

[LWC]

Will last a while that mate! Especially as you arent using a massive amount. I dont usually start worrying till it gets to 10 ish. Although i did let it go to 020 last time, you care less and less me you do this mate 

[GB Window Cleaning]

keep the water at 000ppm mate to be safe. brush well and rinse with with a high flow rate, then hopefully you wont have all the prolems im having!

[LWC]

keep the water at 000ppm mate to be safe. brush well and rinse with with a high flow rate, then hopefully you wont have all the prolems im having!

What problems that? Mine at 020 were drying ok...well no complaints, i changed it because i felt i should.

[Hedgehog]

http://www.gardinerpolesystems.co.uk/acatalog/De-Ionisation_Calculator.html


Use this calculator...this would be worse case as you can keep working above tds 0000 if you wanted

[H2O TECH]

cool seems to be approx 5-6 months thats not to bad.