[chanster00]

It's Currently ok as I have DI in van but I was told my 4040 should produce water at 000ppm

Don't want to order a new RO just to be told it only works at a higher pressure.

[steve k]

open drain valve fully and flush water through so all is going to waste...do this for 20 minutes or so.
Your RO is dropping our Liverpool water from aprox 250 to 25ppm...that is OK and your DI does the rest.

If you lived in a soft water area you wouldnt have a RO...just a DI vessel.

Keep up Eddie!!

[mikecam]

open drain valve fully and flush water through so all is going to waste...do this for 20 minutes or so.
Your RO is dropping our Liverpool water from aprox 250 to 25ppm...that is OK and your DI does the rest.

If you lived in a soft water area you wouldnt have a RO...just a DI vessel.

Keep up Eddie!!

Mine starts at 130 ppm and comes out the RO about 5ppm and i'm only round the corner from you!

[chanster00]

in  my last house the water from tap was 057ppm after ro was 40 bit of a waste but i was one of the unfortunte ones that got ripped off by brodex!

not sure what tap water is now but its in low 100s

been doing regular flushs not much of a difference!

where about you from mike?

[mikecam]

Wavertree mate.

[mikecam]

BTW i forgot to ask is your RO pumped or just feeding from your tap, if so whats your tap pressure?

[steve k]

250 in Garston!! weird!!

[chanster00]

its from the tap! i have bought a booster pump but i jumpped the gun bought on of those stupid clarke booster pumps, was so strong it pulled the water from next doors house! what pump you suggest?
do i know your van mike whats ya company name?