Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: nige on August 23, 2003, 06:06:32 pm
-
what ones r u using ??? the 1st unger bbelt was good then used new one but couldnt get on with it dont like having second squeegee other way round found it awkward also u get alot of nicks in rubbers.aparantly there is a new 2003 design less swing and softer bits anyone found this better ???what about the new winspray bucket pouch anyone using that ,.the nylon sounds a good idea rather than plastic banging your leg all day,would apretiate feedback on which bbelts youve tried and what ones you like cheers ;)
-
get the one which has a v shaped entry , it,s easier to get the blade in ,
don,t bother with the blue one with 2 extra compartment,s for extra blades
mine have two holders , one on the front for a 5 inch blade with handle attached , never seen these for sale so i made my own ,easy you need an old bucket which is no use ,remove the holding part ang glue it to the front, just remember to drill a hole into the main bucket so it does not fil up with water , you need to see it !! it,s the best design and so are my pockets i designed my own so you don,t get your scrim wet at all.just cut the sides and add another piece to give more volume
-
Welcome aboard Sinbad!
Fine username you have there - hope you're not named after the guy on Brookie, are you?
Giving us useful advice on your first post? You're the type of contributor we're looking for - please stick around!
you need to see it !!
Any chance of some pictures of this device of yours?
Oh, and any chance of you filling in your signature and profile? And check out the welcome message towards the top of each window cleaning board too.
All the best
-
I only use the 'bucket on a belt' to house the applicator (T-Bar and Sleeve). To carry all the other things, (scrim, squeegee etc) I use a fitters tool belt. loads of pockets, and the bucket just hangs off of it. I know it's not traditional, but hey, works for me....