Clean It Up
UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: fresh on February 11, 2010, 11:42:47 am
-
went and looked at some hallways in a block of offices today the hallways are light colour biege and carpet tiles they are hammered with coffee dirt the lot the bloke said it was a last ditch attempt i use a truckmount just wondered what chemicals you would use i will post pics when done also the carpet tiles are laid on solid wood flooring
cheers dan
-
Sounds like a job for ultrapac renovate.... although I have had prety good success with HD microsplitter on this sort of thing.
-
Are they secure ?
-
yes there secure
-
Buff em ::)
-
Daves right you could try buffing them first and see how the turn out ???
-
Don`t f$nny about...hot powerburst, mega aggitation, jobs a good un.
-
gary first, dave second, and give them the best results in the business.
-
if they are well fitted agree power burst and nuke them with the tm. Not denying you can buff to a good result but why make life a struggle
-
If they really are that battered then id suggest you hit it with Prochem Power Burst then bonnet mop over the top, This will give you the best of both worlds plus will help dry off the carpet tiles. If they are not that bad then you should get away with bonneting, Fusion by Solutions seems quite good on tiles. Regarding which type of bonnets are best id suggest Charly pads which can be purchased from Alltec, if you dont do alot of bonneting then this may be expensive so it may be worth getting the Prochem cotton pads. Micro fibre pads are not much good so i wouldnt go for them.
Richie.
-
cheers all think going to try heat wave but prespray with champion lots heat i like these sort of jobs a right challenge and cust happy hopefully i did tell him i cant create miracles
-
Agree with above hot powerburst fib fab rinse