Clean It Up

UK General Cleaning Forum => General Cleaning Forum => Topic started by: mark.laycock1@ntlw on June 03, 2008, 10:33:46 pm

Title: hot washer kachcer
Post by: mark.laycock1@ntlw on June 03, 2008, 10:33:46 pm

how do i get the water pressure up? i have a tank on it . it fill put when you use that water it slow down and you have to wait till it fills up to wash driveways etc. any advice

Title: Re: hot washer kachcer
Post by: BDCS on June 04, 2008, 09:26:04 pm

Its not very clear but it sounds like you have a blocked filter

Title: Re: hot washer kachcer
Post by: mark.laycock1@ntlw on June 04, 2008, 10:01:28 pm

hi, do you get better presure when you pump water from a bin? to keep the pressure up?

Title: Re: hot washer kachcer
Post by: BDCS on June 05, 2008, 08:52:58 am

It all depends on the flowrate of the m/c versus the pressure and flow of mains water - if the mains is poor then yes but you need to check all is well on the m/c first. I run from a 240ltr bin thats filled via a float valve but you need to find the flowrate of the m/c as even a really poor mains will give about 10 l/min