Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: m baker on May 17, 2007, 03:37:56 pm

Title: help!!! is this set up correct???
Post by: m baker on May 17, 2007, 03:37:56 pm

Hi,

heres a pic of my set up in van, is this round the right way?

thanks

[attachment deleted by admin]

Title: Re: help!!! is this set up correct???
Post by: jeff1 on May 17, 2007, 04:12:45 pm

Your filter is on the correct side.

Just a couple of points? Your varistream is right under your pump, any leaks then it could mean Bye! Bye! varistream.

same goes for your pump, if you have it vertical, then less chance of water hitting the motor and it will be less strain on the bearings.

Just had another look, if you unbolt the plate its all on,  turn it around to the right and everything will be ok.

Title: Re: help!!! is this set up correct???
Post by: peterharwood on May 17, 2007, 04:28:19 pm

I think you should turn it 45 degrees to the right.

Title: Re: help!!! is this set up correct???
Post by: m baker on May 17, 2007, 04:51:22 pm

thanks for that guys,i thought that would be the case,cheers

Title: Re: help!!! is this set up correct???
Post by: Spruce on May 17, 2007, 05:48:29 pm

I thought that the Shurflo pump was to be fitted with the motor at the bottom and the inlet/outlets at the top!

Title: Re: help!!! is this set up correct???
Post by: jeff1 on May 17, 2007, 05:55:25 pm

Quote from: Spruce on May 17, 2007, 05:48:29 pm

I thought that the Shurflo pump was to be fitted with the motor at the bottom and the inlet/outlets at the top!

No!  Motor at the top,

Motor at the bottom and any leaks water will go straight into the motor