Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: L.Doubtfire - The Blade Runner on February 14, 2004, 09:33:45 pm

Title: Angle Adaptor For W.Fed Poles
Post by: L.Doubtfire - The Blade Runner on February 14, 2004, 09:33:45 pm

Is there anyone on the group who knows who stocks and sells the small
plastic angle adaptor thats used on some of the O.T.T. poles in conjunction
with their brushes? Its colour is black.I don`t think O.T.T. ( Ionic) do them
anymore or at least they are not advertised in their up to date brochures that
I have. Some time ago I was told they are a Contico product,but I can`t find
anything after a `search`. I assume this product is still made.All replies to the
whereabouts of a stockist etc. much appreciated.


Lewis Doubtfire ( Blade Runner)

Title: Re:  Angle Adaptor For W.Fed Poles
Post by: APS_PureWash_Sys on February 14, 2004, 10:24:04 pm

Yes I do But you will not get hold of me now till mid next week

andy

Title: Re:  Angle Adaptor For W.Fed Poles
Post by: Old_Master on February 16, 2004, 02:15:26 pm

We have them in stock
0208 405 6782

Title: Re:  Angle Adaptor For W.Fed Poles
Post by: stevekennedy on February 20, 2004, 10:21:17 pm

Can the residential poles from ott (and others) be cut down/ modified? For instance could the brush be changed?

Title: Angle Adaptors For Water Fed Poles
Post by: L.Doubtfire - The Blade Runner on February 20, 2004, 10:38:28 pm

You could change the brush I guess provided the brush you want to use has
the same width opening as the present brush O.T.T. use.
Personally I find once the detergent has been rinsed away its a nice brush to use.
Its a straight fit on,not angled like most.Its the angle adaptor itself I`ve found
difficult to obtain.


Lewis Doubtfire, Gleem Clean (Blade Runner)

Title: Re:  Angle Adaptor For W.Fed Poles
Post by: Philip Hanson on February 21, 2004, 12:50:50 am

Quote

Can the residential poles from ott (and others) be cut down/ modified? For instance could the brush be changed?

Yes, its very easy.  I have done this with my 18ft residential pole so as to accept my brush with modified jets.

Also, the end clamp can be removed, the pole sawn, and then the clamp replaced again so as to make the pole shorter.

Phil