Clean It Up
UK Floor Cleaning Forum => Frequently Asked Questions & Useful Resources => Topic started by: purdy on October 27, 2005, 04:50:22 pm
-
Hi all, some advice please regarding the cleaning of a white wool carpet.
Which pre- spray to use?
And would it be okay to extract using a fibre & fabric rinse using luke warm water. cheers
just starting first cc tommorow.
-
Hi Purdy
you should use a cleaning chemical with a PH of 7 or less ideally a woolsafe approved product, it is a good idea to use an acidic rinse to finsh however not alway necessary if the correct product is used in the first place, also be aware wool is a water loving fibre and therefore very absorbant, so take care not to over wet the fibre.
Hope this helps
Best regards Nick
-
Thanks for your help Nick cheers,